SureServo AC Brushless Servo Drives family & MotorsProducts | Drives, Motors & Control Gear | SureServo AC Brushless Servo Drives family & Motors | |  | All Drives & Motors
Eight standard servo motors that can be operated in combination with one of three standard servo drives. |
| |  | I/O Interface, Communications & Software
Available connection cables from the drive to the motor come in standard lengths from 3m to 18m.
* ASD-BM-50A - Terminal block
* SVC-PCCFG-CBL - RS232 programming cable
* SVC-MDCOM-CBL - RS422/485 communication cable
* SV-PRO - Drive configuration software |
|  | Accessories
External Regeneration Resistors - Used to bleed off excess energy to prevent servo drive overvoltage faults
RF Filter - Effective at reducing radiated noise from the motor power cable.
AC Line Filters (single and three phase) |
|
 SureServo Systems: 3 standard servo drives, 8 standard servo motors...100W to 3kW.Precise control of position, velocity and torque at incredible prices!
The SureServo family of brushless servo systems is fully digital and offers a rich set of features to cover a broad range of applications. There are eight standard permanent magnet servo motors that can be operated in combination with one of three standard servo drives.- Eight standard systems from 100W to 3kW
- Use with DirectLOGIC PLCs or any other host controller
- Drives feature on-board indexer and adaptive tuning modes
- Free setup software - download at: www.SureServo.com/downloads.htm
- 30-day money-back guarantee & Two year warranty
Why Use a Servo?
The SureServo servo systems provide the highest possible level of performance for precise control of position, velocity, and torque. Compared to lower cost stepping systems, the SureServo products provide:- More torque at higher speeds (up to 5,000 rpm)
- Broader range of power (up to 3kW)
- Higher response with closed-loop control (high hit rate without stalling or lost position)
SureServo™ Family: The SureServo family is designed for flexibility and quick implementation. SureServo drives accept a wide range of command sources:- Built-in motion controller w/preset position, velocity or torque
- Select presets with switch inputs and/or the multi-drop Modbus serial interface
- Position commands with “pulse and direction” or “count up and down” format
- Analogue voltage Velocity or Torque command
- Encoder follower
For configuration, tuning and diagnostics:- use the drive’s integrated keypad /display
- or take advantage of the free SureServo Pro™ PC-based software.
- Tune the system easily with adaptive auto-tuning selections or a manual mode.
Adapt to diverse applications with configurable I/O, including:- eight digital inputs,
- five digital outputs,
- two analogue monitors
- and a scalable encoder output.
|
|
