 | AC Variable Speed Drives
DURApulse variable speed drive products provide a variety of AC drive models to support all your industrial control applications.
- GS1 miniature V/F Inverter drive - 0.18 to 1.5kw, 115/230 VAC input.
- GS2 micro V/F Inverter drive - 0.18 to 7.5kw, 115/230/460/575 VAC input.
- DuraPULSE GS3 Sensorless Vector series - 0.75 to 75kw, 230/460 VAC input.
|
|
|
 | Stepper Motors & Drives
- Four standard stepping motors and a "one-size-fits-all" stepper motor driver.
- Holding torques from 0.59 Nm to 3.06 Nm, in NEMA size 17, 23 or 34 frames, the stepper motors handle a wide range of automation applications, including woodworking, assembly and test machines.
|
|
|
 | AC Servo Drives & Motors
Fully digital drives, with eight standard servo motors that can be operated in combination with one of three standard servo drives.
- 100w to 1kw - Low Inertia systems
- 1kw to 3kw - Medium Inertia systems
|
|
|
 | AC Motor Soft Starters
STELLAR™ SR22 and SR44 series semi-conductor solid state soft starters provide many advantages when used instead of electro-mechanical contactors to control 3-phase AC induction motors. The SR22 motor soft starters use thyristors for controlled reduced voltage motor soft starting and stopping. New! ... The SR44 solid state starters are fully digital and have an Automatic Application Setup that fully configures the motor soft starter for a specific application with one entry. Energy Optimizing mode reduces electrical consumption on lightly loaded/oversized motors. |
|
|
 | AC Inverter-duty Motors
MicroMAX® AC Inverter-Duty Motors 0.18kw to 7.7kw (0.25Hp to 10Hp)
Black Max® Vector Duty Motors 0.18kw to 22kw (0.25Hp to 30Hp)
Black Max® Vector Duty Motors with Encoder 0.18kw to 22kw (0.25Hp to 30Hp)
Blue Max® 2000 Vector Duty Motors 30kw to 75kw (40Hp to 100Hp)
Blue Max® 2000 Vector Duty Motors with Encoder 30kw to 75kw (40Hp to 100Hp)
Blue Chip XRI® - Ultra High Efficiency Inverter-Duty Motors 11kw to 75kw (15Hp to 100Hp) |
|
|
 | AC GP Motors for Drives
TEFC 56 frame single & 3-phase AC motors with rolled steel frames; flange mount and removable mounting bases; 0.25kw to 1.5kw
TEFC T-frame three-phase Premium Efficiency AC motors with cast iron frames and mounting feet; 0.75kw to 2.2kw
STABLE™ motor slide bases for adjustable mounting of NEMA motors from 56 - 449T
Note: IronHorse motors are for use with Variable Speed drives set for 60Hz base output frequency, or 60Hz main supplies only. (They are rated for 190v single phase or 380v three phase at 50Hz) |
|
|
|
 | AC Motor Bases
STABLE Motor Bases are mounting slide bases for 56 to 449T NEMA motors
- Allows adjustment of motor mounting position
- Double adjusting screws for frames 182T - 449T
- Manufactured to precise dimensional standards
- Dimensionally interchangeable with existing major makes
- Heavy-duty steel construction
- Painted with oven-baked primer for better adhesion of customer’s paint
- All “D” bolts (motor mounting bolts) are fixed to the exact motor foot pattern
- All “D” bolts are welded into position to prevent spinning and dropping from slots
- Bases are provided with washers
|
|
|
 | Worm Gearboxes
- Dual shaft gearboxes (both right and left output shafts)
- New! ... Hollow shaft worm gearboxes (all the way through both sides)
- IronHorse gearboxes utilize C-face mounting interfaces for C-face motors
- Worm gear reducer mounting bases are also available for ease of installation
- Three output types: Dual Shaft, Right Hand Shaft and Hollow Shaft
- Four frame sizes: 1.75", 2.06", 2.37", 2.62"
- Six ratios: 5:1, 10:1, 15:1, 20:1, 40:1, 60:1
|
|
|
 | Motor Controls
As control systems become more compact and the need for more cost-competitive electric motor control options arise, an IEC motor controller is the answer. Complying with the stringent International Electrotechnic Commission (IEC) 60947 standards, our IEC motor control series of motor contactors and motor starters offers convenience and cost-effectiveness in one package.
- New! ... Bryant Manual Motor Controllers/ Motor Disconnects
- ProSense™ Motor Monitoring Relays
- Fuji Contactors / Overload Relays
- Fuji Manual Motor Starters
- Eaton Cutler-Hammer Motor Contactors / Motor Starters / Overload Relays
- GH Series Contactors / Motor Starters / Overload Relays
|
|
|
