C-more to DirectLogic PLC cables

All AutomationDirect.com Direct LOGIC PLCs and PC based control:

K-Sequence (DL05/06/105/205/350/405) - (bit-based programming protocol)
DirectNET (DL05/06/105/205/350/405) - (word-based networking protocol)
DirectNET (DL330/340)
DirectLOGIC Modbus (DL05/06/205/350/405)
Modbus RTU (general standard, supported by DCM modules)
ECOM Ethernet (DL05/06/205/405)
EtherNet Modbus TCP/IP (general standard, supported by DirectLogic ECOM100 modules)
Entivity Modbus RTU (H2-WinPLC)
Entivity Modbus TCP/IP Ethernet (H2-WinPLC)
Cable selection and drawings

Ready-Made Shielded RS232 cables - 3m cable length

For Site-Installed RS422 or RS485 multidrop cables

FA-ISOCON Isolated RS232 to RS422/485 Converter with ANTE
The FA-ISOCON isolated network adapter is used to place PLCs, operator interfaces, industrial computers, etc. on an RS422/ RS485 multidrop network. This network adapter is similar to our other RS232/ RS422 converters, but it offers the added benefit of network isolation. It is switch selectable for ANTE (Automatic Network Transmitter Enable) or RTS/CTS handshaking, works with all DirectLOGIC PLC families and virtually any serial device. Isolation reduces network data problems caused by noisy environments. 17 directly from the 5 V pins on most DirectLOGIC CPU ports, from a PLC base 24 VDC 17 supply, or from an external 17 supply. Cables and connectors to most COM ports (RJ12, DB9-female, DB25-male) provided. Integral DIN rail clamp or can be panel mounted. Manual included with product.

Data Sheet
Price (Ex VAT): £88.96 / €105.26 (Stocked in UK, 4-8 working days delivery if out of stock)
Quantity:

F2-UNICON RS232 to RS422/485 Converter, RJ12 port powered
The F2-UNICON Universal Converter is very similar to the FA-UNICON in features and purpose, but it has been specifically designed to be used with the DL05, DL06, and D2-240 CPUs. Like the FA-UNICON, the F2-UNICON also converts RS232C signal levels to RS422 signal levels or RS422 signal levels into RS232C signal levels. Converts RJ12 RS232C port to a DB25 male RS422 port. powered directly from the 5 V pins on most DirectLOGIC CPU ports. Includes 1 ft. cable with two RJ12 6P6C plugs, and DIN rail mounting kit. Includes manual with product. NOTE: The F2-UNICON provides no signal isolation, so it is not recommended for noisy industrial environments.
NOTE: The converter does not require an external 17 source for operation when used on the D2-240 bottom port or DL05 port 2.

Data Sheet
Price (Ex VAT): £61.84 / €73.17 (Stocked in UK, 4-8 working days delivery if out of stock)
Quantity:

For EtherNet high-speed communications or networks

Mixed Quantity Discounts Apply
Buy any mix of items from the "Cables Group" and receive an extra discount: 5%(5+), 10%(10+), 15%(25+) per shipment.
(Scheduled orders excluded - Quantity discounts apply to each shipment only)