Fibre-Optic SensorsProducts | Sensors, Encoders, Limit Switches & Transducers | Fibre-Optic Sensors  | Ø18mm Amplifiers
Sensitivity adjustment using Teach button.
- 4 models available
- Sensing range is dependent on the optical fiber used (See specifications for Optical Fibers, such as CF series)
- Normally open/ normally closed and NPN/ PNP output selectable, Light-on/ Dark-on selectable output
- Red LED with visible spot
- 2m axial cable exit or M12 quick-disconnect
- IEC IP67 protection rating
|
|  | DIN Rail mounting Amplifiers
- 4 DIN-rail mounting models available
- 12-turn potentiometer with illuminated scale for sensitivity setting (DFP series)
- Sensitivity adjustment using Teach button (DFT series)
- Sensing range is dependent on the optical fiber used (See specifications for Optical Fibers, such as CF series)
- Multifunctional output: NPN or PNP; Light-on/ Dark-on modes
- Bar graph signal-strength indicator (DFT series)
- Red LED with visible spot
- 2m axial cable exit or M12 quick-disconnect
- IEC IP64 protection rating
|
|  | CF series - Optical Fibre Sensor Heads
- CF-CB series: Diffuse 50mm sensing distance
- CF-DB series: Diffuse 200 - 260mm sensing distance
- CF-RB series: Through-beam 120mm sensing distance with lens
- CF-TB series: Through-beam 200 - 1800mm sensing distance
|
|  | Cables & Accessories
A variety of cables and accessories are available for fibre-optic photoelectric sensors.
- Cables - Pico (M8) Quick-disconnect
- Cables - Micro (M12) Quick-disconnect
- Extension cables with quick-disconnect plugs on each end (M8 and M12)
- Mounting brackets
|
|
|
