Powering the C-moreMicro-Graphic PanelPower can be supplied to the C-moreMicro-Graphic panel in one of three different ways.
- The C-more Micro-Graphic panel is powered during programming from the PC through the USB to RS-232 Programming Cable Assembly, EA-MG-PGM-CBL. The panel will operate in Low-Power mode when powered by the PC and result in a dim screen.
- During operation, the panel functions in High-Power Mode when powered by a minimum 1 Amp 12 - 24 VDC power source. Recommended power supplies are part number PSP24-024S or PSP24-024C.
- During operation, the C-more Micro-Graphic panel can function in Low-Power Mode powered from most DirectLogic PLC’s RJ12 serial communications port. Use a DV-1000CBLcommunications cable, or a DV-1000CBL communications cable with a FA-15HD 15-pin HD DSub/RJ12 Adapter connected to most DirectLogic PLC’s 15-pin HD communications port (DL06, D2-250-1 & D2-260) PLCs for Low-Power operation. See Chapter 6 of the manual: "PLC Communications" for additional details.
|
|
Bezel Options - with Keypad |
|
|
Overlays & Replacement Function Key labels |
|
|
|
|
|
|